ADM485: 5 V Low Power EIA RS-485 Transceiver

ADM485:  5 V Low Power EIA RS-485 Transceiver

The ADM485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with EIA standards RS-485 and RS-422. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver can be enabled independently. When disabled, the outputs are three-stated.
The ADM485 operates from a single 5 V power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. If during fault conditions, a significant temperature increase is detected in the internal driver circuitry, this feature forces the driver output into a high impedance state.
Up to 32 transceivers can be connected simultaneously on a bus, but only one driver should be enabled at any time. It is important, therefore, that the remaining disabled drivers do not load the bus. To ensure this, the ADM485 driver features high output impedance when disabled and when powered down, which minimizes the loading effect when the transceiver is not being used. The high impedance driver output is maintained over the common-mode voltage range of −7 V to +12 V.
The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating).
The ADM485 is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. All inputs and outputs contain protection against ESD; all driver outputs feature high source and sink current capability. An epitaxial layer is used to guard against latch-up.
The ADM485 features extremely fast switching speeds. Minimal driver propagation delays permit transmission at data rates up to 5 Mbps while low skew minimizes EMI interference.
The part is fully specified over the commercial and industrial temperature range and is available in 8-lead PDIP, 8-lead SOIC, and small footprint, 8-lead MSOP packages.

 

Features

  • Meets EIA RS-485 standard
  • 5 Mbps data rate
  • Single 5V supply
  • –7 V to +12 V bus common-mode range 
  • High speed, low power BiCMOS 
  • Thermal shutdown protection 
  • Short-circuit protection
  • Driver propagation delay: 10 ns typical 
  • Receiver propagation delay: 15 ns 
  • typical High-Z outputs with power off
  • Superior upgrade for LTC485

Applications

  • Low power RS-485 systems 
  • DTE/DCE interface
  • Packet switching
  • Local area networks (LNAs) 
  • Data concentration
  • Data multiplexers
  • Integrated services digital network (ISDN)

 

Íomha Cuid # Déantóir Cur síos Stoc Praghas Ceannaigh
HEN.1M.308.CLNP
LEMO
标准环形连接器
53715
Min : 1
-
Sonraigh
DTS24F13-04PA-3028-LC
TE Connectivity / DEUTSCH
环形MIL规格连接器 DTS 4C 4#16 PIN J/N RECP
55494
Min : 1
-
Sonraigh
620-053B08A
Glenair
环形MIL规格应变消除装置与适配器 BKSHLL ACCY THREAD STRAIN RLF MED DUTY
50511
Min : 1
1+
$323.1574
5+
$318.8634
10+
$312.3546
25+
$295.1108
50+
$286.5341
Sonraigh
CN0967C16G24P6-000
Cinch
标准环形连接器 24C 24#20 P TH RECP LC
59722
Min : 1
1+
$438.3496
5+
$425.3998
10+
$412.5291
25+
$399.6584
50+
$373.8379
Sonraigh
62GB-56T22-55PE-044-771-760
Amphenol Pcd
环形MIL规格连接器 61P Sz24 Min Bayonet Straight Plug Pin
55779
Min : 1
-
Sonraigh
D38999/42WJ19BE
Glenair
环形MIL规格连接器 Environmental Connectors
56922
Min : 1
-
Sonraigh
97-3055-22-10
Amphenol Industrial
环形MIL规格应变消除装置与适配器 Bushing Adapter Shell Size 20, 22
59339
Min : 1
1+
$58.0707
Sonraigh
BACC63CC20-41S6H
Cinch
标准环形连接器 26500 41C 41#20 S BY RECP LC
50749
Min : 1
1+
$429.2870
5+
$416.6536
10+
$404.0315
25+
$391.3981
50+
$366.1313
Sonraigh
Leathanach 1 / 1